Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Patterson-Kelley Boilers

Justin Topel
Justin Topel Member Posts: 65
I was looking at the Patterson-Kelley Mach series boilers.  Does anyone have any feedback concerning their performance, reliability, installation issues?  I would love to use an American manufacturer, but I have no experience with these puppies.  Any problems with the aluminum sections?  Any input would, as always, be greatly appreciated.  Thanks in advance.



Mister T

Comments

  • TJ_5
    TJ_5 Member Posts: 71
    P&K Boilers

    We have a few of the P&K boilers that we service.  They are older models late 1990's  they are  ok to work on, they do need TLC in keeping burner and flame rods clean (running on lp) but all in all no problems.  The local Rep in Ma is always there for help also
  • hot_rod
    hot_rod Member Posts: 22,022
    aluminum

    do they make those sections or blocks in the US? Looks a lot like some Euro boiler blocks.



    hr
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
This discussion has been closed.