Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Equivalent length

Options
STEVE PAUL_3
STEVE PAUL_3 Member Posts: 126
in THE MAIN WALL
GOOGLE TACO RADIANT TD10. THEN GO TO TABLE 2

Comments

  • Paul Fredricks_9
    Paul Fredricks_9 Member Posts: 315
    Equivalent length

    I thought I'd do a little exercise on calculating flow through a baseboard loop. Think I could find the equivalent for a 3/4" copper elbow? I looked everywhere: my books, google, the Wall. tried my local supply house. He had screw fittings, but no copper. Looked in the Burnham helper where I was sure I'd seen it before, but no.

    What gives? Am I blind or dumb, or both. Help?
  • MikeyB
    MikeyB Member Posts: 696
    elbow

    3/4" copper elbow is equivelant to 2 feet of copper, I'll try to attatch a list of ftgs equivelants for you
  • MIke_Jonas
    MIke_Jonas Member Posts: 202
    2,435,775,ft/hd

    3/4" copper 90 elbow 2'

    3/4" copper 45 elbow .75"



    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Paul Fredricks_9
    Paul Fredricks_9 Member Posts: 315
    Ahhh

    Thanks. Man, I couldn't believe it would be so hard to find.
This discussion has been closed.

Categories