Navien with Heating Box install

Jim Bennett · March 2009

looking piping. Very well planned and clean work.

A job to be proud of.

Jim

Rely_2 · March 2009

Navien with Heating Box install

This is an install done by an up and coming Mechanic. We are very proud of his work. Job was well though out and bib by Kenny. Tell us what you think.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Rich Kontny_3 · March 2009

Nice

What is the heat load? Might want to extend the vent on the 9D a little closer to the floor since they tend to weep. I have two of these systems supplying in-floor. Very nice workmanship!

Rich

Rely_2 · March 2009

Pic was at 95% complete

Thanks for the input you made ken's day I took that pic at 95% complete here is the finished product the load on the system 87,000 btus 2 zone.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Erich_3 · March 2009

Great Looking

Great looking installation. What kind of hanger are you using on the concrete block for the 4 copper lines? What kind of material is it made from? It is nice and neat looking.

Mike Dunn · March 2009

Rich

In the two radiant floor systems what were the heat loads?

Thanks,

Mike Dunn

Rich Kontny_3 · March 2009

One

Is use for a garage and is about 80,000btu (pushing the limit) The other is about 20,000 btu (living space)

Unknown · March 2009

Very nice

But just a couple of well placed cable straps on the chords would add a touch.

Mad Dog_2 · March 2009

Very neat and sqaured away........he should be

PROUD. Mad dog

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Navien with Heating Box install

Comments

Categories