Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Telephone Interfaced Viessmann

Options
Derheatmeister
Derheatmeister Member Posts: 1,659
in THE MAIN WALL
Not sure if i am "Coding" the Viessmann correctly.

#1 charged to 011:001

#2 Changed to 027:001 ??

#3 Changed to 0C8:000

Then i set the "Reduced room temperature knob" to 60F , make and break contacts between X 4.1 and X 4.2 via a Autodailer wait for about 2 days and am finding the the temperature in the house is still around 70F.

NOT sure about the 027: 001 code? ,also is the "reduced room temperature" dial the lower setting value or is Viessmann using a "parallel shift" in the heating curve setting for the lower supply temp.?

Does anybody have experience with this setup?

Thanks Richard

Comments

  • Marc_21
    Marc_21 Member Posts: 6
    Telephone

    Change coding address 027 to :000 (external switching of heating program). Make sure the contacts are CLOSED on X4 1-2 for the reduced operation time. The moon dial is a "parallel shift". The other settings appear to be correct.

    Marc
  • Ted_5
    Ted_5 Member Posts: 272
    read out on control

    it will also read telephone program on the control when the contacts are closed
This discussion has been closed.

Categories