Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Carlin G3B versus EZ-Gas Burners
Options
Steve Garson_2
Member Posts: 712
So after creating a chart to compare the features, it looks like the EZ-Gas has these extra benefits over the G3B:
1. Wider BTU range
2. 2 Amp motor versus 8 Amp
3. Electronic ignition versus hot surface ignition
4. 4 second verus 7 second trial for ignition
5. Carlin primary control versus Fenwal
6. Latch-up after 3 consecutive lock-ups
7. 1.3 second Flame Failre Response Time
Seems like enough benefits that I will send back the G3B.
Steve
1. Wider BTU range
2. 2 Amp motor versus 8 Amp
3. Electronic ignition versus hot surface ignition
4. 4 second verus 7 second trial for ignition
5. Carlin primary control versus Fenwal
6. Latch-up after 3 consecutive lock-ups
7. 1.3 second Flame Failre Response Time
Seems like enough benefits that I will send back the G3B.
Steve
Steve from Denver, CO
0
Comments
-
Carlin G3B versus EZ-Gas Burners
I ordered an EZ-Gas burner and the supplier delivered a G3B. I didn't realize it until I opened the box.
Can anyone tell me the difference, since they seem quite similar? I'll need 130,000 BTU.
Thanks.
SteveSteve from Denver, CO0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 150 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements