Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
adding radiant heat
Mark Custis
Member Posts: 539
but we need more infornation.
0
Comments
-
adding radiant
adding radiant heat to cast iron hot water boiler with one pump on return and 2 zone valves on feed. what is the easiest and correct way to do this. i fiured i would tie the feed and return together,use existing pump as the primary pump which would run when ever there was a heat call. cut a mixing valve pump and thermomother in to feed for my radiant loop,and place ball valve and boiler drain on return of radiant to bleed it.use a relay to operate new radiant pump. will this work?
thanks eddie0 -
what else do you need to know0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements