Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
One pipe steam-reducing pipe size
Options
Glen_7
Member Posts: 82
I'll check and post back later. It was from another area of my home where it wasn't needed anymore. The feed to it always was 1", so I assumed it was adequate.
0
Comments
-
I'm adding an additional radiator to my home using an existing (capped) takeoff on the main. The takeoff is 1 1/4" but the radiator inlet is 1". At what point should I make the reduction to 1", at the main or at the riser?
Thanks.0 -
How much EDR
is the radiator rated for?
"Steamhead"
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements