Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
manifold location preferance
Options
Solarstar
Member Posts: 81
Is there a prefered location to have the (Pro's and Cons)radiant supply and return manifold higher or lower than a wall mounted boiler?????
0
Comments
-
I cannot see
much more preference other than logistics. Upfeeding top outlet headers high and downfeeding headers down low. Nothing more than preference for what fits and is easiest to service. Closed system so venting and purging takes care of any air issues. Naturally you will have a low water cut-off or similar device regardless, but especially with piping below the boiler.
My $0.02 (US)
0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements