Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Left Hand plug pictures

Options
Daniel_3
Daniel_3 Member Posts: 543
in THE MAIN WALL
Just though I'd share pictures of these very beautiful black iron 1 1/2 " LHT npt plugs for my wall rads I got in the mail today. I think the "D" might be for my first name =)

Comments

  • Ericjeeper
    Ericjeeper Member Posts: 179
    Options
    pure works of art

    Whoever machined those did a nice job
  • ttekushan_3
    ttekushan_3 Member Posts: 958
    Options
    beautiful.

    I have the same problem at a job thats going to require rearranging of a LOT of wall radiators, 1-1/2" just as you have.

    Also looks like they can be tapped for 1/2" NPT eccentric outlet for steam traps. Just like the original outlets. Did you have a local shop do these (I'm guessing not since they came by mail)?

    -Terry
    terry
  • Christian Egli_2
    Christian Egli_2 Member Posts: 812
    Options
    Secret origins from Dayton

    And for the truly absolutely impossible to find part, here is the 1 1/2 left hand plug in nothing less than stainless steel (the austenitic type if you must know)

    I include the picture.

    Thanks, Daniel - D, for the happy endorsement you are giving those cute plugs and thanks for your business.

    Thanks everyone too for the compliments.

    Christian
  • bob young
    bob young Member Posts: 2,177
    Options
    those babies are lovely

    like jewelry
  • Daniel_3
    Daniel_3 Member Posts: 543
    Options


    http://www.gowelding.com/met/austenitic.html

    This revealed more info on the austenitic stainless steel that you mentioned. It truly is quite strange and interesting.
  • Al Corelli_2
    Al Corelli_2 Member Posts: 395
    Options
    I would like to put one of those on my desk!

    > like jewelry





    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

    There was an error rendering this rich post.

  • Al Corelli_2
    Al Corelli_2 Member Posts: 395
    Options
    I would like to put one of those on my desk!

    Very NICE!!!

    There was an error rendering this rich post.

  • Christian Egli_2
    Christian Egli_2 Member Posts: 812
    Options
    Just looking for holes now

    It figures Austin Powers would wear this sort of bling bling. Shiny and spotless, plus it screws to the left.

    Thanks again for the compliments, I'm very happy you all like the plugs.
  • ALH_4
    ALH_4 Member Posts: 1,790
    Options
    NICE

    Those would make VERY cool paper weights.
  • gerry gill
    gerry gill Member Posts: 3,078
    Options
    sweet!!!!!!!!

    and best is i now know who to pester when i need one..hey Christian, do you make eccentrics also? getting hard to find.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
    gwgillplumbingandheating.com
    Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.

  • Christian Egli_2
    Christian Egli_2 Member Posts: 812
    Options
    Anytime, anything

    For talking about steam, you're never pestering, and it's always a treat hearing from you Gerry.

    I rather think I make one heck of a big eccentric myself, but adding a plain 1/2 or 3/4 offset hole on those left hand plugs is an easy option. I also still have a local supply of exotic fittings but I still had the grandest headache finding a batch of 2x1/2 elbows. (just because I wanted no reductions in there)

    Always happy to answer your call.
This discussion has been closed.

Categories