Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Recommended Mfr for steam radiator supply valves?
Options
Robert Knox
Member Posts: 5
I need to replace a couple of steam radiator supply valves. I bought one at the local large chain hardware store, but upon reflection, realized that the quality of these devices probably runs a spectrum. This is one purchase that I'm willing to pay the extra money for quality. I don't feel like going around in a couple of years to replace my "new" supply valves. And yes, I'm a firm believer of "They don't make them like they used to" - and I'm not even that old. I figure that the ones I'm replacing are the originals, and are leaking only because of repeated disconnection due to home renovations.
Would anyone care to recommend a manufacturer of such supply valves?
Peace,
Bob.
Would anyone care to recommend a manufacturer of such supply valves?
Peace,
Bob.
0
Comments
-
Tunstall
http://www.tunstall-inc.com/rv602.html
Theirs can be retrofit for TRV's too. Nice solid valves."If you do not know the answer, say, "I do not know the answer", and you will be correct!"
-Ernie White, my Dad0
This discussion has been closed.
Categories
- All Categories
- 87.5K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 429 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 118 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 15.9K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 50 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements
