Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Frequency Drive Motors

Carrier Variable Speed Motor was not working at all. We replaced the motor module and now it just "bumps" back and forth. When we spin the shaft by hand, we can feel the resistance of the magnets, but the motor still wont come on. We checked the harness for continuity. Any suggestions?

Comments

  • tim smith
    tim smith Member Posts: 2,752
    They make a good ecm motor/control test meter for these

    Call your supply house. They might even have one you can try.


  • Thanks Tim
This discussion has been closed.