BTU and SQ FT in steam

Options
Mike T., Swampeast MO
Mike T., Swampeast MO Posts: 6,928
in THE MAIN WALL
Low-pressure steam at/near sea level is easy. 240 btu/hr per square foot EDR. Mountains/high plains call for some de-rating.

Comments

  • Matt_35
    Matt_35 Posts: 2


    Once I have my heat loss in BTU/hr. How does that translate to my steam radiators (Tubes - 200 sq. ft. total)?

    I guess this is a very basic question, but how do I figure out the BTU output of my radiators. I feel like I'm missing an important piece of the puzzle (steam pressure? temp? something)

    Thanks for the help.

    Matt
  • Matt_35
    Matt_35 Posts: 2


    Thanks Mike.


    Matt (Bootheeler, MO)
This discussion has been closed.

Categories