Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Ball Valve for radiator supply valve

Options
John Boyer
John Boyer Member Posts: 60
Hello,
I have a one pipe steam heat system in my house that was built in 1935. The radiators are recessed into the walls. Several of the radiator supply valves on the inlet side are leaking. I could try to repack several of them but a few are broken and wont close at all. Is it possible to replace them with a ball valve rather than a gate valve? It seems like a ball valve would be perfect for this application since you either want the valve fully open or fully closed. If so can anyone recommend a particular manufacturer? Is this something I should tackle myself as a homeowner? Thanks,
Gregg

Comments

This discussion has been closed.