Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Noisy Peerless PSCII-03
Options
Lee_3
Member Posts: 17
Recently replaced our 35+ year old atmospheric CI boiler and old direct fired water heater with a Peerless PSCII-03 and indirect. It was installed by an established and reputable heating plumbing comapny the install was permitted and inspected by the city etc.
The system drives fin tube base boards on two floors.
We have 2 problems:
They occur when the system is firing and the power vent is on. No problem when just circulating.
1) a vibration we can feel in the floor.
2) Noise from the power vent can be heard on the first floor.
Any thoughts on how to eliminate these , particularly the vibration.
The system drives fin tube base boards on two floors.
We have 2 problems:
They occur when the system is firing and the power vent is on. No problem when just circulating.
1) a vibration we can feel in the floor.
2) Noise from the power vent can be heard on the first floor.
Any thoughts on how to eliminate these , particularly the vibration.
0
Comments
-
Lee, please E-mail me your telephone # and where you are located. My company represents Peerless in New England. We will get the problem fixed for you.0
This discussion has been closed.
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 120 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements