Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

NeedHelp Identifying Steam Convectors

Options
Mark_35
Mark_35 Member Posts: 44
in THE MAIN WALL
Trying to do some EDR calculations for new boiler. Can anyone identify the convectors (see pix). The house is 1935, has two-pipe vapor system with Trane B-1 traps and Trane Return trap over old boiler. These convectors are recessed in wall - some two pipe with 3-1/2" wide by 2" deep fins and and some three pipe with 5-1/4" x 2" fins. Copper tubes and copper fins. Cast iron headers fed from below only with tappings on top. They are mostly 24" high. Have adjustable damper as shown. Does anyone know what these are and have any tables for these.

Mark B

Comments

This discussion has been closed.

Categories