Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Wiring tekmar 508 thermostat to taco sr503
Options
kpc_43
Member Posts: 21
http://www.taco-hvac.com/en/products/Zone+Controls/products.html?current_category=138#
0
Comments
-
Does anyone know how to
wire a Tekmar 508 thermostat to a Taco sr503 swichting relay? The Tekmar needs a 24v power source to run. Does the SR503 have a 24v power source that I can tie into?
Thanks,
Jim0 -
Check your email
I would recommend a separate and clean 24V power source.
Paul
0 -
Paul?
Can I have one, too?
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements