Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Baseboard radiator hums.
Options
Jay_24
Member Posts: 1
Changed out a Weil McLain oil for a new Buderus GB142 and when we were through one zone(2nd floor) has a hum from somewhere. The baseboard is Slant Fin #30 the pumps are Taco variable speeds for the heating zone with Honeywell zone valves. We turned down the pump speed to low and this seemed to help but did not cure the problem. Any suggestions?
0
Comments
-
Jay
Sounds like a hanger that is too close for comfort.
Do some more digging I`m sure you`ll find it.
Dave0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements