Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Anyone remember.....
Options
J.C.A._3
Member Posts: 2,980
Lay down some (940') of pex today. I seem to remember a kind of warning about using tape to keep a roll secured. Does anyone know or remember what it was about?
I did cut off the offending lenths that were taped because of some doubt....but can't for the life of me recall why.
Anyone....Bueller, Bueller ? Chris
I did cut off the offending lenths that were taped because of some doubt....but can't for the life of me recall why.
Anyone....Bueller, Bueller ? Chris
0
Comments
-
Taping Pex
At Rehau, they told us NEVER to use duct tape on PEX because one of the chemicals (chlorine???) used in the manufacture of the tape will compromise the integrity of the tubing.0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements