Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

New code in Illinois CDD-1 @ 200k Btu's

Options
Kevinj_3
Kevinj_3 Member Posts: 27
in THE MAIN WALL
In Michigan it applies to 0 thru 12.5 million btu boilers. In my opinion it is a good code. We shut down a lot of boilers that were very unsafe in the first year of the code adaption.

Comments

  • Lil-Roc
    Lil-Roc Member Posts: 50
    New code in Illinois

    Effective Jan 1, 2008 CSD-1 controls required on boilers 200k Btu's and greater.
  • jp_2
    jp_2 Member Posts: 1,935
    shuts gas off?

    do they shut the gas off? what safeties shutdown a suck open gas valve?
  • Boilerpro_5
    Boilerpro_5 Member Posts: 407
    Thanks for the heads up......

    It nice to see Illinois is improving thier safety requirements. I have also seen much better enforcement in the state in the last few years.

    Boilerpro

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Chas_2
    Chas_2 Member Posts: 104
    commerical

    I always though the manual reset hi limit was strickly on commerical buildings or on system that was controlled by electronic (digital) controls like a tekmar or such ,I am in total agreement on the steam with double lwco electronic and mech and a manual pressurtrol ,but would these be required on larger residental jobs also peace and good luck clammy
This discussion has been closed.

Categories