Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Reclaiming 410
Options
Eugene Silberstein 3
Member Posts: 1,380
Dave?
Can you hear me now?
Hello?
Can you hear me now?
Hello?
0
Comments
-
reclaiming 410 without contaminating 22
If we use a common reclaimer for 410 and 22, how do we avoid contaminating the reclaimed refrigerant in one cylinder with the leftovers in the machine from a different system? When we go into the purge cycle, what forces the remaining refrigerant out so there is no residue inside the machine?
Are we expected to buy a new machine for 410? Thanks0 -
The\"De Minimis\" Code
Hi! Does this fall into "De Minimis" catagory? I use one recovery pump for 8 different refrigerants, and I sure hope I'm not breaking any laws.0 -
Awesome Question
Awesome question and we should direct this to the master of recovery: Mr. David Boyd of Appion... I'll give him a shout and get his take on this.0 -
Calling Dave Boyd
You there Dave?0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 160 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 848 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements