Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

condensate traps

Options
steve_164
steve_164 Member Posts: 10
in A-C, Heat Pumps & Refrigeration
Is there a formula to figure out the depth of condensate traps?

Comments

  • Brad White
    Brad White Member Posts: 2,398
    Options
    The formula:

    f(x) = (integral)(0-inf) ( a(y) cos yx + b(y) sin yx ) dy

    a(y) = 1/PI (integral)(-inf-&gtinf) f(t) cos ty dt

    b(y) = 1/PI (integral)(-inf-&gtinf) f(t) sin ty dt

    f(x) = 1/PI (integral)(0-inf) dy (integral)(-inf-&thinf)f(t) cos (y(x-t)) dt

    Or, you can just do what I do and make the trap depth equal to the total static pressure of the air handling unit plus one inch.
    "If you do not know the answer, say, "I do not know the answer", and you will be correct!"



    -Ernie White, my Dad
This discussion has been closed.

Categories