Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Flair Zone Valves
Paul Fredricks_3
Member Posts: 1,556
I know Flair went out of business about 12 years ago, but does anyone know where I might find a rebuild kit for a 1" valve? It would be the stem and o-ring if I remember right. I know I should just change it out, but it's a favor for a friend and the location and piping make it a pain in the neck.
Anyone know of an old plumbing shop that has a few on a back shelf?
Anyone know of an old plumbing shop that has a few on a back shelf?
0
Comments
-
Well, maybe that answers my question.0 -
Flair TRVs
I sure Tunstall makes rebuild kits for the Flair. Give them a call at 1-800-423-5578 to see if they have a rep. in your area who will sell to them to you.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
No luck there, they have conversion kits for their operators, but if I'm doing that, I'll just replace it all with something more universally serviceable.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 946 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements