Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

service light is on (not blinking) not fire, motor is not turnin

Norm Harvey
Norm Harvey Member Posts: 684
in THE MAIN WALL
What kind of heating system do you have?
What kind of Burner?
What is the model of the control showing the service light?



<A HREF="http://www.heatinghelp.com/getListed.cfm?id=395&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

There was an error rendering this rich post.

Comments

  • Dave_4
    Dave_4 Member Posts: 1,404
    service light is on no firing

    Does anyone know what is going on?
    Light is on (as it is firing), no fire, motor is not turning.
    New nozzle, electrods were cleaned.
    Any idea?
  • Big Bob_2
    Big Bob_2 Member Posts: 23


    If this is a R7184 control, the light being on indicates that the cad cell is sensing light and will not allow the burner to operate until it no longer senses light. If it is not sensing light from a flame or other stray light, Then the cad cell is bad or the cad cell wire is shorted
This discussion has been closed.

Categories