Welcome! Here are the website rules, as well as some tips for using this forum. 
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website.  Thanks!
peerless steam re pipe
 
            
                
                    clammy                
                
                    Member Posts: 3,233                
            
                        
            
                    Found this one with this beautiful copper header and a great hartford loop pressuretrol set at 10 psi .Riped it all out and did a drop header and re did the returns to include some main air vents she was quite dirty and the bottom was full of rust and mud .I also got rid of the original bull head tee  and ran seperate rised to each main  and put in a hartford loop unlike the previous one the original plumber would not come back to straighten this mess out said that's the way steam system work meaning the banging pipes and surging water line pretty funny huh?Today i'll go back do a little water side cleaning and fire her up ,this my last job till nov on off to brazil  peace clammy                
                R.A. Calmbacher L.L.C. HVAC
NJ Master HVAC Lic.
Mahwah, NJ
Specializing in steam and hydronic heating
0                
            This discussion has been closed.
            Categories
- All Categories
- 87.2K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 427 Carbon Monoxide Awareness
- 118 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 112 Geothermal
- 164 Indoor-Air Quality
- 3.7K Oil Heating
- 73 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements