Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Monoflow fittings and pump sizing

Unknown
Unknown Member
in THE MAIN WALL
then I agree with you.

Noel

Comments

  • BOB_3
    BOB_3 Member Posts: 8
    MONOFLOW FITTINGS AND PUMP SIZING

    I HAVE AN 11/2" SINGLE PIPE SYSTEM FEEDING 20 SMALL CONVECTORS. EACH CONVECTOR HAS 1 MONOFLOW TEE. WHEN SIZING THE CIRCULATOR DO YOU HAVE TO CONSIDER THE FRICTION LOSS THROUGH THE CONVECTOR. MY WAY OF THINKING IS THAT YOU WOULD NOT HAVE TO SINCE YOU ARE FIGURING THE FRICTION LOSS OF THE MONOFLOW. RIGHT OR WRONG?
This discussion has been closed.

Categories