Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

I got some steam vents & valves I want to sell...

Alan R. Mercurio_3
Alan R. Mercurio_3 Member Posts: 1,624
in THE MAIN WALL
You're welcome and I apologize if I miss-understood.

Your friend in the industry,<BR>Alan R. Mercurio<BR><BR><a href="http://oiltechtalk.com/discuss/index.php?sid=63c67a82829fdbdda388591b32998104">www.oiltechtalk.com</a><BR><BR>

There was an error rendering this rich post.

Comments

  • RAM_2
    RAM_2 Member Posts: 16
    Got some steam vents & valves... help please...

    I aquired some valves and air vents for steam and HW the other day and am planning to resell them. I am having trouble coming up with the wholesale prices since people here in NC don't even know what steam is. Shucks, they barely know what hot water heat is down here. (It is horrible for a wet head like me.)

    Anyways, if someone out there would want to help me out and put some prices to a short list I could send to you I would appreciate it.

    Thanks.

    Richard Miller (formerly from CO and one of the old timers on the wall)

    PS. if you could give me a hand e-mail me at rich@operationfreedom.com

    (edited to clarify I am not trying to sell on here but need some help with pricing.)

  • RAM_2
    RAM_2 Member Posts: 16
    deleted by original poster

    deleted by original poster
  • RAM_2
    RAM_2 Member Posts: 16
    deleted by original poster

    deleted by original poster
  • RAM_2
    RAM_2 Member Posts: 16


  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    WetHeadWarrior, did you notice there is a new area here where you can possibly sell them parts and support the wall at the same time. Pretty cool eh?

    Just click on the Buy,Sell,Show!Link to your left and check out the details.

    Good luck

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • RAM_2
    RAM_2 Member Posts: 16
    Thanks...

    Thanks... but I saw that. What I really need is some prices.

    In looking over my post I can see where it may look otherwise so I am going to edit it.
  • RAM_2
    RAM_2 Member Posts: 16
    no apology needed

    I am the one to apologize for lack of clarity.
This discussion has been closed.

Categories