Burnham MPO (Multi-Pass Oil) Preview

Unknown

It should be on LI sometime in September. I'll keep you posted. There will be more details in a few weeks when it is formally introduced and appears on the Web Site and ttrade magazines.

Glenn Stanton

Manager of Training

Burnham Hydronics

www.burnham.com

Unknown

The Burnham MPO Boiler

is currently traveling around New England in the Burnham Boiler Truck and should be at a location near you real soon. The truck has a working MPO boiler installed for all to see, touch and hear running. Here are a few locations where it will be available for viewing this week as well as couple of photos.

The live-fire Burnham MPO truck will be at the following locations in Connecticut this week.

Monday - 6/20 - Supply New England - Guilford, CT (formerly Emerson Supply) 11 am - 2 pm

Tuesday - 6/21 - Shelton Winnelson - Shelton, CT - 12 - 4 pm

Wednesday - 6/22 - Patterson Supply - Danbury, CT - 12 - 2 pm

Glenn Stanton

Manager of Training

Burnham Hydronics

www.burnham.com

Unknown

Glenn

Will the travelling show be making it to Long Island ? I'd like to see that little beauty up close and running .

Weezbo

Glenn ,..Chirp it up a bit... *~/:).. what are the recommended

return temps? have they a special burner that recognizes faults and alerts someone by audible or light? are there built in controls for radiant out door reset that are available? just wondering ....

Unknown

Weezbo

This one can handle return temperatures as low as 100°F without condensing. It has a Honeywell electronic high limit and R7184P that are both compatible with the Honeywell Enviracom system. It can be equipped with three (3) different levels of Tekmar based controls from simple reset to injection mixing.

Glenn Stanton

Manager of Training

Burnham Hydronics

www.burnham.com

Weezbo

A habby homeowner reading this would gather this is a new

boiler soon to be available and would surely like to twist thier plumbers mind about by suggesting that the plumber give them a MPO option in the bid *~/:) the reasonable will see the ROI quietly add up ...Thank You, Glenn.

Rocky_2

Glenn

> is currently traveling around New England in the

> Burnham Boiler Truck and should be at a location

> near you real soon. The truck has a working MPO

> boiler installed for all to see, touch and hear

> running. Here are a few locations where it will

> be available for viewing this week as well as

> couple of photos.

>

> The live-fire Burnham MPO

> truck will be at the following locations in

> Connecticut this week.

>

> Monday - 6/20 - Supply

> New England - Guilford, CT (formerly Emerson

> Supply) 11 am - 2 pm

>

> Tuesday - 6/21 - Shelton

> Winnelson - Shelton, CT - 12 - 4 pm

>

> Wednesday

> - 6/22 - Patterson Supply - Danbury, CT - 12 - 2

> pm

>

> Glenn Stanton

>

> Manager of

> Training

>

> Burnham Hydronics

>

> www.burnham.com

Rocky_2

Glenn,

They better hurry up and make here to Fairbanks, as I am already bidding jobs for them! Nothing like putting the cart before the horse! You answered one question I had, that being if they can handle reduced return temps like the Buderus Thermostream design. Sounds like they can. Have sold 7 jobs in the last two weeeks utilizing Buderus. Thats 7 you could have had if we had them in Fairbanks! C'mon man, times a wastin'!
regards,
Rocky

Weezbo

It isnt as though we havent Asked The Keller Plumbing Co.

to roll some our way *~/:) Queen Victoria and i were scaning the Burnham web site for them the other morning...tsk ....tsk....:) no where on site...whats the wholesaler to Do? guys like us banging in boilers 90 to nothing during our warm yet short summer like frenzied caffine derived hydronic technicians A? yet MPO no can find.....:(

This is a great testing ground as it gets slightly chilly around here from time to time *~/:)

Unknown

There are some on the way

Check with your rep again as there are some on the way. The formal unveiling will happen very shortly as will the website introduction of the product. Be patient and good things will follow!

Glenn Stanton

Manager of Training

Burnham Hydronics

www.burnham.com

Unknown

The MPO Traveling Roadshow

The Burnham traveling MPO Truck will be at the following locations in the Boston area:

June 29th - Wednesday - Murray Supply - Medford, MA - 10 am - 2 pm

July 7th - Thursday - Ferguson Enterprises - Braintree, MA - 10 am - 2 pm

From what I understand there will be a cookout at noon on both days so stop on by! I will be there on the 29th.


Glenn Stanton

Manager of Training

Burnham Hydronics

www.burnham.com

J.C.A._3

Hey Glenn,

Coming anywhere just north of Medford that you know of yet?

Are Ferguson in Lynn or maybe Peabody supply In the tour schedule?

If we know, we can plan on it. Always good to see a fine product on tour and hopefully, you're not neglecting any teaching to be in the show!(Education FIRST!) Chris

Unknown

Right now.......

I have the following locations north of Boston. Our representatives have organized these stationary events in conjunction with one-on-one visits to various installers. I always get in a little training!

I have:

July 14th - The Portland Group - Haverhill, MA - 11am - 2 pm

July 15th - The Portland Group - Saco, ME - 11am - 2pm

Both of these will also have cookouts at noon.

Glenn Stanton

Manager of Training

Burnham Hydronics

www.burnham.com

Biged

Burnham MPO

did you just go right by Boston proper or did I miss that?

Unknown

You missed it Ed!

The truck will be in Medford on 6-29 and in Braintree on 7-7. I'm not the one to decide where it goes or doesn't go. We leave that up to our reps for the various areas.

Glenn Stanton

Manager of Training

Burnham Hydronics

www.burnham.com