Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

MA Code Training

Jim_53
Jim_53 Member Posts: 8
in THE MAIN WALL
We're a week away and there are a only a few spots left.

Better register soon if you don't want to be shut out.

Info can be found at http://www.gasnetworks.com/training/training.asp

or call 800-662-9222

Comments

  • GasNetworks
    GasNetworks Member Posts: 74
    MA Code Training

    The last three sold out so we've added another! This one's in Andover MA.

    Training Seminar on the Updated Fuel Gas and Plumbing Code March 28, 2006 : 5-8 pm (Dinner 5 pm)

    Andover MA
    Wyndham Hotel
    123 Old River Road
    Andover, Massachusetts 01810

    Directions at:
    http://www.wyndham.com/hotels/BOSAM/main.wnt

    Due to overwhelming demand, GasNetworks has added an additional training seminar on the recent revisions to the Massachusetts Fuel Gas and Plumbing Code

    GasNetworks is sponsoring these training sessions for local inspectors and plumbing, heating, and HVAC contractors. Learn about sidewall venting, combustion air, chimney venting, and GasNetworks Rebate Offers.

    Just $25 per person includes a hot/cold buffet dinner and reception!

    We'll begin with a wonderful buffet dinner and reception at 5 and get right into the training seminar a 6 pm. There will be an opportunity to purchase the new code books at a special rate after the seminar!

    IMPORTANT: Seating is limited, don't be shut out. Register today!

    TO REGISTER, PLEASE CALL 1-800-662-9222

  • GasNetworks
    GasNetworks Member Posts: 74


    Bump
  • GasNetworks
    GasNetworks Member Posts: 74
    Starting

    to fill up. Don't wait!
  • Jim_53
    Jim_53 Member Posts: 8


    > The last three sold out so we've added another!

    > This one's in Andover MA.

    >

    > Training Seminar on

    > the Updated Fuel Gas and Plumbing Code March 28,

    > 2006 : 5-8 pm (Dinner 5 pm)

    >

    > Andover

    > MA Wyndham Hotel 123 Old River Road Andover,

    > Massachusetts 01810

    >

    > Directions

    > at: http://www.wyndham.com/hotels/BOSAM/main.wnt

    > Due to overwhelming demand, GasNetworks has added

    > an additional training seminar on the recent

    > revisions to the Massachusetts Fuel Gas and

    > Plumbing Code

    >

    > GasNetworks is sponsoring these

    > training sessions for local inspectors and

    > plumbing, heating, and HVAC contractors. Learn

    > about sidewall venting, combustion air, chimney

    > venting, and GasNetworks Rebate Offers.

    >

    > Just

    > $25 per person includes a hot/cold buffet dinner

    > and reception!

    >

    > We'll begin with a wonderful

    > buffet dinner and reception at 5 and get right

    > into the training seminar a 6 pm. There will be

    > an opportunity to purchase the new code books at

    > a special rate after the seminar!

    >

    > IMPORTANT:

    > Seating is limited, don't be shut out. Register

    > today!

    >

    > TO REGISTER, PLEASE CALL

    > 1-800-662-9222


  • Jim_53
    Jim_53 Member Posts: 8


    I attended the last one and it was great. Well worth the time.


    > The last three sold out so we've added another!

    > This one's in Andover MA.

    >

    > Training Seminar on

    > the Updated Fuel Gas and Plumbing Code March 28,

    > 2006 : 5-8 pm (Dinner 5 pm)

  • Jim_53
    Jim_53 Member Posts: 8


    IAPMO will be authorizing 2 hours of continuing education credits to inspectors that attend the event in Andover on March 28, 2006.
  • Big John_3
    Big John_3 Member Posts: 1
    Credits

    That's great to hear. As an inspector, it's getting important to get credit for attending these events.

    See you there.
    John
  • GasNetworks_7
    GasNetworks_7 Member Posts: 3
    MA Code Training

    We need to give the hotel a count by the end of the week, so if you're thinking of signing up, please do it soon! Call 1-800-662-9222

    Thanks!
  • GasNetworks_7
    GasNetworks_7 Member Posts: 3
    Code Train

    Just signed up. See ya there.
  • GasNetworks_7
    GasNetworks_7 Member Posts: 3


  • GasNetworks
    GasNetworks Member Posts: 74
    Excellent

    Suggestion to all, make the time to attend this event. As one who attended this in the Berkshires it was well worth it. Extremely well presented, excellent turn out of contractors, gas inspectors, gas suppliers and supply companies. The meal and social gathering was also
    great. You should not under estimate the value of such a meeting.
  • GasNetworks
    GasNetworks Member Posts: 74
    ONLY

    12 seats left!!! Register now before we have to shut it off!!

    1-800-662-9222
  • Unknown
    Unknown
    I'm confused.

    Is this to maintain licensure in MA? I don't follow the regulations but, as a Lic Ma plumber I must comply. I hear we all need another 30 hours. "State accredited hours" Is your class able to do this? Can't see how.

    Any Ideas where to get the 30 houes?

    Wallace Radiant Design

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • jackchips_2
    jackchips_2 Member Posts: 1,337
    The continuing

    ed program has not been finalized yet, Gary. So far just inspectors are required to do it and I believe it is 16 hours.

    As I recall from the last Inspectors session plumbers will be required to do 12 hours a year to maintain our license.


    Jack
This discussion has been closed.

Categories