Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
message for burnham
ed wallace
Member Posts: 1,613
please please make your wiring diagrams that are mounted on boiler cover and in your install manuals larger also could you put srparate piping diagrams for staem and hot water boilers separate all you have to do is look at the way wiel mclain publishes thier disgrams
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=354&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=354&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Ed
I would assume that you are probably referring to the Independence boiler in this post. In the I&O manual for the Independence, we combine schematic and ladder type wiring diagrams on the same page a well as on the ovrlay that is adhered to the inside of the removable vestibule cover. Combining these both reduces their printable size by 50%. I would expect that in the near future, you will see only the schematic diagrams on the door panel. The manual does have seperate drawings for hot water and steam and they are full page drawings. Take a look at the I&O for the V8 boiler and this should give you a better idea of what future drawings will all look like.
Right now all of our available engineers have been diligently working on the introduction of several brand new products and their respective manuals such as the MPO-DV Oil Direct Vent, SCG Gas Direct Vent and PVG Gas Power Vent boilers. They are all up for you to see on our website. Thanks for the input Ed!
www.burnham.com
Glenn Stanton
Manager of Training
Burnham Hydronics
U.S. Boiler Co., Inc.0 -
welcome back,Glenn.
hope you are feeling up to snuff. bob young0 -
Thanks Bob!
> hope you are feeling up to snuff. bob young
Glenn Stanton
Manager of Training
Burnham Hydronics
U.S. Boiler Co., Inc.0 -
Thanks Bob!
> hope you are feeling up to snuff. bob young
Glenn Stanton
Manager of Training
Burnham Hydronics
U.S. Boiler Co., Inc.0 -
Thanks Bob!
I'm actually still supposed to be out of action, but I have been stopping by here and a few other sights at least once a day. I've been taking in Cardiac Rehab three days a week and they're doing a pretty good job of beating me up and keeping me in line. Doctor says around April 1st but I'm targeting for March 1st. We'll see who wins! I think I feel pretty darn good until I get home from the Rehab sessions. I'm getting there though...slowly but surely!
Glenn Stanton
Manager of Training
Burnham Hydronics
U.S. Boiler Co., Inc.0 -
welcome back glenn
welcome back glenn glad to hear you are doing better
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Good Health To You
Hi Glen,
Glad to hear you are feeling better.
Keith0
This discussion has been closed.
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 98 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 931 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 42 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements