Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Cleaver Brooks CB 600-300

Michael Rogers
Michael Rogers Member Posts: 29
in THE MAIN WALL
I am an electrician working with a local boiler shop refitting old boilers into portable/temp boiler rooms. I have been working on a CB 600-300 and am in need of a electrical schematic for it. It is 600V source power, gas/oil fired and is 300HP. I would love to hear from anyone who might have a print for this old girl.

Comments

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 17,288


    I think your best bet is the local CB rep. All those nice black wires. I think they are numbered though.


    Ed
  • Michael Rogers
    Michael Rogers Member Posts: 29


    > I think your best bet is the local CB rep. All

    > those nice black wires. I think they are numbered

    > though.

    >

    > Ed



    That would be nice if I had time to track said person down, but alas I need this info sooner than later. But I will try to find a rep., but again if anyone has any prints they would like to share it would be appreceated.
  • scrook_2
    scrook_2 Member Posts: 610
    C-B reps

    Take a quick surf here... http://www.cbboilers.com/findarep/index.asp?co=cb

    Or call corporate in Milwaukee at 414-359-0600

    Where are you located?
This discussion has been closed.

Categories