Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Banging Hydronic Zone
Empire_2
Member Posts: 2,340
You said on, but usually its when it goes off if pump is too much for that particular zone. Possible expansion??? has any new construction been performed? Is ZV flow in the right direction? Possible crap inside the line in that particular zone.??????
My .02
Mike T.
My .02
Mike T.
0
Comments
-
We have a customer that is complaining about one of her hot water zones bangs when it turns on. Any Ideas?0 -
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements