Controls for GB142 - Smart 40

Rodney Summers

from what i see your contractor did to you by almost killing you id till him to get lost and to never come back

you could have not been posting here today or enjoying your new house :-( because of him

no mater what you install try and find someone who will check there work and make safety a number 1 priority

sorry but I'm just frustrated to here what happened to you.

you where smart by leaving the house when you felt sick

good luck and best wishes to you.

try the find a pro link on this site

on the water heating id go with a buderus indirect if your boiler can handle it.

Steven_4

Need some advice

New construction, with both radiant in slab, staple up and bb. Could anyone recommend a control for linking our indirect phase III smart 40 and our GB 142. Our contractor had never installed this water heater or boiler and had origanally recommended a Vaughn top performer. He said that the vaughn would not need this control but that thisphase III does. Any help would be great.

Mark Hunt

Well


Inside the box with the RC-10 controller there is a sensor for the indirect. It fits perfectly in the well of the Phase III.

Your contractor has to pull the sensor that comes with the Phase III out and install the Buderus sensor. That sensor is wired to the terminals in the GB and you control the indirect from there.

You sure you want to let this guy touch anything else on your project?

Mark H

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Mad Dog_2

I'm with the boys here...and the pressing question is??????????

Why are YOU, the diligent homeowner (who almost got gassed) here and NOT him? Just don't wanna see anyone get hurt physically OR financially. Mad Dog

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

central VT

Mark,
We would have loved to have you so the system but we live too far away.