Steamhead

Steamhead (in transit)

all the rads are completely hot before it starts to cycle, and everything heats evenly, you should be OK.

"Steamhead"

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=367&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

thfurnitureguy_5

Steamhead

Howdy! just did the main pipe insulation and am now cycling on pressure toward the end of the burn. It was a warmer day. At what point does this become bad? Is some cycling on pressure ok? Thanks. T.

thfurnitureguy_5

Thanks for the reply. I dropped my run time from 80 min to 50 min. from the same outside temp day last year. This could be a 25% reduction in fuel.

Steamhead (in transit)

Do you know

how to track your oil consumption on a gallons-per-degree-day basis? This will give you some very meaningful numbers. Go here for degree-day info:

http://www.cpc.ncep.noaa.gov/products/analysis_monitoring/cdus/degree_days/

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"