Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
A Thread
mp1969
Member Posts: 225
A thread can only be pulled so far before it breaks or becomes irrelevant. As far as the Pro-Press problem goes I would get chemical analysis of the mixture,installation procedures and perhaps a metallugist involved to look for inconsistancies of the pipe structure.There has to be answers either pro or con regarding this application of Pro-Press.
As far as tolerances are concerned it is the nature of the beast due to globalization based on price versus quality.Price should have followed global standards ( yet to happen)
As far as technology goes it does not take a brain scientist to figure out that the Europeans have faced high fuel prices way before we have and are far ahead of us in sophisticated controls, heat producing devices and regulations that are policed to assure compliance.
It is one thing to be patriotic, however sooner or later you have to become a realist which in turn should convince you that we have very fuel inefficient heat sources in this country with an energy policy based on the needs of the fuel producers more than the users.
The formation and continued growth of the European Union (which includes the United Kingdom) will leave this great country of ours in it's dust (they don't produce much soot).
Some should read more and speak less. We are into this globalization movement for good and international co-operation will far better serve us than baseless criticism.
Food for thought!
Make Peace your Passion!
MP 1969
As far as tolerances are concerned it is the nature of the beast due to globalization based on price versus quality.Price should have followed global standards ( yet to happen)
As far as technology goes it does not take a brain scientist to figure out that the Europeans have faced high fuel prices way before we have and are far ahead of us in sophisticated controls, heat producing devices and regulations that are policed to assure compliance.
It is one thing to be patriotic, however sooner or later you have to become a realist which in turn should convince you that we have very fuel inefficient heat sources in this country with an energy policy based on the needs of the fuel producers more than the users.
The formation and continued growth of the European Union (which includes the United Kingdom) will leave this great country of ours in it's dust (they don't produce much soot).
Some should read more and speak less. We are into this globalization movement for good and international co-operation will far better serve us than baseless criticism.
Food for thought!
Make Peace your Passion!
MP 1969
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 939 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements