Pressure drop through Aquapex

Bob Gagnon plumbing and heating

I have about 65 PSI water pressure, but the water temp will be between 40F- 70F. I'm assuming I'll be O.K. with the 1". What is HDS, the software for figuring that?
Thanks again, Bob Gagnon

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=331&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Bob Gagnon plumbing and heating

Pressure drop through Aquapex

I'm going to wrap about 200' of 1" Aquapex around a Grey water tank for a domestic pre-heat. Would I expect to have much of a pressure drop in my hot water main, with that much pipe? Thanks, Bob Gagnon

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

hr

Got HDS?

I ran a 7.5 gpm flow and it shows 3 psi drop per 100 feet with 140F temperature water.

hot rod

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"