Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Hide a pipe

Options
Doug Bleicken
Doug Bleicken Member Posts: 1
in THE MAIN WALL
We are replacing electric baseboard with a hydronic system in 34 6 family buildings and rather than open walls etc the engineer has asked for a hide a pipe / pipe enclosure which I am not familiar with, any suggestions?

Comments

  • Brad White_9
    Brad White_9 Member Posts: 2,440
    Arsco and Soffi-Steel

    are two that I have come across. We had not specified them, but the contractor suggested them in lieu of blank radiation cover. We are glad they did.

    They enabled us to run unit ventilator refrigerant piping and controls along a wall and up the walls to the roof, neatly. I am sure that there are other system manufacturers.

    These were about 16 GA or heavier steel and powder-coated. Very tidy I thought.
This discussion has been closed.

Categories