Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
cir help
D lux_2
Member Posts: 230
I have a customer who has a 1950s hot water sys duel fuel coal / nat gas . the B& G circulator is a little noisy customer oiled last year 3 and 1 oil . circulator is a B&G 1/6 hp 1725 rpm MRF38 EW 115 6 8 mortan grove Ill flange to flange 8 3/4 pipe 2.5 1/6 hp . new circulator is pricy is it possible to use a regular 100 series smaller inlet ? and still move enough heat ? what info is needed thanks for any help . d lux
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements