Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Watching work
Maine Doug_51
Member Posts: 23
Rob finished the boiler piping insulation this morning. I am glad I decided that this was something that I was probably not going to do well.
With a pair of scissors and a serated kitchen knife from Marden's he made it look so easy. Just hold the length of pipe insulation up, punch a couple of holes as guide marks, cut to length, make holes for valve handles, a curve cut to meet the next pipe and Bam, it fits. Nice little boots for the 90's and 45's. I said he must have done the boilers in the school building rehab and the answer was yes.
Nice job and I enjoyed watching an artist at work. Looks like I am doing a glass panel to pay for it.
With a pair of scissors and a serated kitchen knife from Marden's he made it look so easy. Just hold the length of pipe insulation up, punch a couple of holes as guide marks, cut to length, make holes for valve handles, a curve cut to meet the next pipe and Bam, it fits. Nice little boots for the 90's and 45's. I said he must have done the boilers in the school building rehab and the answer was yes.
Nice job and I enjoyed watching an artist at work. Looks like I am doing a glass panel to pay for it.
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements