Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Omni Waste Oil Boiler
Paul Rohrs_4
Member Posts: 466
Has anyone had the opportunity to install one of these waste-oil boilers? I am leaning towards the Omni and away from "Clean-Burn".
Any input would be helpful.
Regards,
PR
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=353&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
Any input would be helpful.
Regards,
PR
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=353&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Bump - One is the lonliest number
Okay, I'll refine my question. Anyone who has installed a waste-oil boiler, can you give me the good and bad qualities of the model you chose?
Thanks.
Paul
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
I prefer the omni too but there are others. Each one has it's own advantages and disadvantages.
What is your application?0
This discussion has been closed.
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 966 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements