Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Service Gas Ignition?
Techman
Member Posts: 2,144
If so ,I recommend the "Timmie McElwain" thread in the next lower section on the wall.
0
Comments
-
Hi Techman
I thing Tim has a training course coming up soon. RI is the location.
Mike T.0 -
I have taken several
of Tim's classes and have the books on the wall to show.
One thing, he cannot cover it all in class but what he does show is that alot of it is repetition same stuff just in a different box.
Always left class wanting more, never board. Going through the books while in class also helps at home study.
Hands on in the field is what will really bring it all together.
I have learned a lot of little tidbits in class while we go off topic in a way, those little bits have saved my but on several service calls and installs.
Mitch S.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements