Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

opinion / experience with UEI combustion analyzer

realolman
realolman Member Posts: 513
If anyone would care to give his opinion of <A href="http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=004&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=140033461256&rd=1&rd=1">this:</A>
combustion analyzer, I'd appreciate it.

thanks

Comments

  • Bill Jirik,
    Bill Jirik, Member Posts: 54
    uei from apple electronics

    I purchased uei model C100A kit from this same vendor (Apple Electronics)last january, they had the best price at the time, seems to be good unit, although I am still learning to use all it's features, the instruction manual is poorly written. These are actually made and sold in england by Kane-May a long time maker of cumbustion analyzer.
  • chuck shaw
    chuck shaw Member Posts: 584
    I like it

    I own one of these units, and I like the fact that you can change the "top line" of the display. You dont have to scroll through mulitple screens to get the information you want. I have sent the unit back to the factory for calibration, and the equipment was back in my hands in just over two weeks, excellent turn around time.

    I also have access to other test equipmnet, a Testo 325 as well as a Fryrite 125. In a side by side comparison, all three worked well. Dollar for dollar, the UEI has the most for the least $$$$. IMO

    Chuck Shaw
  • Plumdog_2
    Plumdog_2 Member Posts: 873
    I got one

    And it seems fine (C75). I got it as a first time buyer because of the cost, and on recommendation of an experienced user. Sent it back for a new O2 sensor and calibration after the first season at no cost; one week turn around. Think I'll get the optional printer. Wish you could buy and install O2 sensors pre-calibrated like some other makes.
This discussion has been closed.