Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

circulator flanges

Brad White_133
Brad White_133 Member Posts: 12
in THE MAIN WALL
As Bruce said. I particularly like the Grundfos round recessed gaskets. They seal against odd surfaces better than the red rubber ones. I have installed and specified Grundfos with all kinds of flanges, universally they have all worked fine.

Comments

  • ralman
    ralman Member Posts: 231
    circulator flanges

    Can the Grundfos 15-58 be used with the Taco cast iron flanges?
  • Ron Schroeder
    Ron Schroeder Member Posts: 998
    Yes they can

    unless you have one of those systems that will not hold a 007, but normally same flanges as 110's etc
  • Ron Schroeder
    Ron Schroeder Member Posts: 998
    Blak gaskets Rule

    they last for years those red things just dry up and leak and a pain to scrape off the flanges.

    brad what are you dong up this hour?? Hey I have an excuse it Vaca week for me.One ringy dingy two ringy dingies , Later Brad
  • Brad White_133
    Brad White_133 Member Posts: 12
    Sometimes

    I just get up! 2:00 AM for me today. Just could not get back to sleep...It varies but I sleep very soundly when I do...

    Back atcha, Bruce!

    Brad
This discussion has been closed.

Categories