Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Overlapping light AL plates

johnnyd
johnnyd Member Posts: 51
in THE MAIN WALL
Kind of what I thought...so you expect they will snap krackle and pop a bit?

Comments

  • johnnyd
    johnnyd Member Posts: 51
    Overlapping light wieght Al paltes

    Ended up with about 20 plates leftover from a small staple-up job and am considering going back and fastening these OVER the plates that are already installed. Any of you ever tried this? I'm concerned that they might be pretty noisy during expansion.
  • Unknown
    Unknown


    NEVER EVER DO THAT.

    NEVER.

    EVER.

    Friends don't let friends let lightweight plates touch.
  • Unknown
    Unknown


    I'd be stunned if you could avoid noise, yes. There is no good reason to do it anyway so it's not worth the risk.
This discussion has been closed.

Categories