Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Ford, Chevy, Dodge
Rodney Summers
Member Posts: 748
Lots of ways to connect radiant tubing and fittings. Are there some to be avoided and the rest just a preference?
If so, what to avoid and what might not work with a given tube.
Thinking of using Mr. Pex by the way. Any issues with that?
BTW, the ultimate is a Ford chassis with the Dodge CTD and the Chevy Allison. But then that's just my preference.
If so, what to avoid and what might not work with a given tube.
Thinking of using Mr. Pex by the way. Any issues with that?
BTW, the ultimate is a Ford chassis with the Dodge CTD and the Chevy Allison. But then that's just my preference.
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 939 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements