Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Trinity boiler

Dave Stroman
Dave Stroman Member Posts: 766
in THE MAIN WALL
I use them a lot. Have had a few minor problems. A fan switch, a couple of ignitors, and a hot surface module. No problems at all with the blowers. The new Ti series has several improvements. Here is a simple one zone cast iron radiator system with domestic water. The Trinity has built in reset and DHW priority.

Dave in Denver

There was an error rendering this rich post.

Comments

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 9,401
    trinity boiler

    NTI trinity boiler?? has anyone had experience with thes boiler? model Ti 150 is a modulating gas boiler for only $2100.oo

    I am familiar with the Weil Mclain ultra. Is this similar

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

  • Jim_65
    Jim_65 Member Posts: 184
    A good ?

    for Dave Stroman in Denver. I know he is very familiar with these boilers.

    Sorry that I am not as familiar but Good Luck!
  • John Starcher_4
    John Starcher_4 Member Posts: 794
    I have installed a few.

    ....and have been happy with them. A couple flame rod issues at first, but I believe it was an exhaust gas recirculation issue. NTI has modified their venting guidelines, and it seems to have taken care of the problem.

    Starch
This discussion has been closed.

Categories