Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Amazing Buderus

Dan_15
Dan_15 Member Posts: 388
in THE MAIN WALL
I just want to say that my Buderus G215 is amazing. We are having our kitchen remodeled and the plumber accidentally left the boiler turned off when he was done for the day. I didnt even notice it because the Crown indirect tank kept that water hot all through the evening. Next morning I awoke to a lukewarm shower. Went down to the basement and flipped on the boiler switch after I discovered the problem. Not more than 15 minutes later I had a piping hot shower. What a recovery rate!

Comments

  • Michal
    Michal Member Posts: 213
    yes they are amazing

    When sized and installed correctly they are amazing. and indirects/pumps sized recovery is amazing I did a buderus G215 with the buderus horizonatl tank (LT200) and boiler on top, and it was in dead of winter, fired it up, went from absolutely cold to 180 in literally 8 minutes, I timed it. Excellent boiler, Was amazed when I went back to clean it, how clean and virtually soot free it ran. Excellent piece of equipment, just take care of it once a year and it will take care of you for years to come.
  • Joe@buderus
    Joe@buderus Member Posts: 165


    Proper installation is as important as the equipment. Drop the installer a note saying how please you are! Thanks,
  • leo g_13
    leo g_13 Member Posts: 435
    Hey Joe

    any plans soon to have a class or 2 in Vancouver on your new condensing unit? Been waiting for a clue from BCP, but so far nadda.

    Leo G

    PS - just had to say that your panel rads are just that, RAD!!!!! Have had nothing but excellent comments on any job that we have installed them. Thanx!

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Ron Schroeder_3
    Ron Schroeder_3 Member Posts: 254


    I accidently did the same thing last summer on a Sunday evening with our G115 and LT150 except we didn't know it until Wed. night. I run the indirect at 170 degrees and have a tempering valve on the output.

    Ron
  • Joe@buderus
    Joe@buderus Member Posts: 165
    Training

    Have your contact at BCP contact Ed Sullivan at 1-800-283-3787 ext 116. Ed is the director of training and can assist is setting something up.Thanks,
  • leo g_13
    leo g_13 Member Posts: 435
    Thanx Joe,

    will do!

    Leo G

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories