Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

nefi show

Alan_11
Alan_11 Member Posts: 64
in THE MAIN WALL
Just got the spec sheet from my van. 357,000btu output at 3 gpm input. weighs 650 lbs. not a lightweight, this is a serious boiler ,replaced 2 20 year old EK-1's with 2 80 gallon tanks heating 9 zones in 8000? sq ft house

Comments

  • Alan_11
    Alan_11 Member Posts: 64
    nefi show

    Just got back from the nefi show in Boston .Lots of great new stuff to see {missed dan's segment) but had a great time anyway .EK-3.On spot .Monitor .Buderus .radiant .propress. whatever your interest it's all there. Hospitality was great also(.Thanks to Global and Energy Kinetics) Check it out .
  • Weezbo
    Weezbo Member Posts: 6,232
    Ok....so,.Any Pic's of the EK-3? thats supposed to be on the

    boiler room floor soon. Is it 399,000 or 299,000?
  • Alan_11
    Alan_11 Member Posts: 64
    E k3

    Didn't bring my camera to the show . but heres one we did a month ago. How is life in the land of the midnight sun ?
  • Weezbo
    Weezbo Member Posts: 6,232
    Looks like a Real boiler *~/:)...

    we are having sunlight and 85 in the shade today in the hills...:) and the suns still out right now...its 5 minutes to 9. ... Thanx ...my buddy is going to bolt one of these up his name is Walt....i kinda think of walt as The Dude on these boilers despite what the *boiler salesman thinks :)i put the 2 in his* home and the guy was a pita constantly. he wanted heat yet he kept fricking with the valves :))) too bad he never heard of Taco set point control i series valves except from me...Oh Welll whats a guy ta do :))
  • Joe Brix
    Joe Brix Member Posts: 626
    WM Ultra oil boiler?

    Was this boiler shown at NEFI? I saw some reference to it
    on oiltechtalk.com Waiting for the specs and availability.
This discussion has been closed.

Categories