Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

New pex cinch crimps

kevin coppinger_4
kevin coppinger_4 Member Posts: 2,124
in THE MAIN WALL
i am sticking w/ the copper rings...kpc

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=323&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • Ericjeeper
    Ericjeeper Member Posts: 179


    what does everyone think of them? Over the old copper crimp ring? I notice the tool is universal and much more affordable. even though the rings are considerably more pricey.
  • ALH_4
    ALH_4 Member Posts: 1,790
    Nope

    I have to agree with kpc. Copper crimp rings seem more reliable.

    -Andrew
  • Man with a question
    Man with a question Member Posts: 69
    Cinch clamps, SSC Clams et al

    I've got hundreds of those on test all over town at 100psi and they hold great.

    If you need to remove them you just break the nipple, pull them off and back off the tube.

    One $150 tool for 1/2", 5/8" , 3/4", 1" size...what's not to like?

    Or you could spend a heck of a lot more time with Propex, bust a few more knuckles with the big red Zurn style tool...

    I'm sure are those who still prefer to do all their accounting in a lined paper notebook as well...and many of them are outstanding contractors and prabably keep better books than me. To each his own.

    Have a great weekend boys!

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories