Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

biasi bioler

Robert O'Brien
Robert O'Brien Member Posts: 3,568
in THE MAIN WALL
quite a few of them,zero problems.A very nice unit,tough to beat in it's price range.Checkout www.qhtinc.com or http://www.newsday.com/news/columnists/ny-hocov4852805aug17,2,1930547.column













<A HREF="http://www.heatinghelp.com/getListed.cfm?id=313&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
To learn more about this professional, click here to visit their ad in Find A Contractor.

Comments

  • Ken_43
    Ken_43 Member Posts: 1
    biasi boilers

    We're looking for information on a Biasi Boiler with Riello burner. I inquired about a new boiler with my local store and he swears by the Biasi boiler and told me how great it was. I went on the web site to read about it but I can't find anyone who has ever heard of it. Please let me know your thoughts about it pros and cons. Thank you....Ken
  • [Deleted User]
    [Deleted User] Posts: 46
    nice unit

    I have a few running and no problems yet. Great boiler for the price and it comes standard with a reillo burner.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Super Drain
    Super Drain Member Posts: 15


    Ive installed 5 or 6 so far. Great boiler. Never had a problem
  • Al Corelli
    Al Corelli Member Posts: 454


    Done quite a few of them.

    Very nice installs. Good bang for the buck.

    No service issues with ANY of them yet.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    The Biasi

    is also sold by Boyertown Fornace as the Solaia. We've installed two, a third is under contract and two more are proposed. It's a nice little boiler and very well supported (at least in the Baltimore area by Columbia Heating Products). Best of all, it is approved for use with oil or gas burners.

    I posted the gas install last time, here's the oil one with primary-secondary and indirect.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    The Biasi

    is also sold by Boyertown Fornace as the Solaia. We've installed two, a third is under contract and two more are proposed. It's a nice little boiler and very well supported (at least in the Baltimore area by Columbia Heating Products). Best of all, it is approved for use with oil or gas burners.

    I posted a pic of the one we did with the gas burner last time, now it's oil's turn. This one has an overhead primary-secondary manifold, 3 heating zones and a Phase 3 indirect. The old Weil-McLain was way oversized, it ran at a firing rate of 1.5 GPH and the oil-fired water heater ran at .75 GPH for a total of 2.25. The system you see here does it all at .75 GPH. That's why we do heat-loss calculations!

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories