Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
concrete overlay
Options
esalen dude
Member Posts: 7
Ok, I want to pour a thin overlay on an existing slab with pex hydronic radiant floor tubing integrated in the pour. I want an acid stain finish and a finish thickness as shallow as I can get to avoid door raising issues. any thoughts on thicknesses possible, use of polmerized concrete mixtures, steel or mesh reinforcements or any other condiderations that would work. Any help is appreciated. Assuming a 3/8 or 1/2 pex tube
0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 848 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 48 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements